How to Assemble your Gorilla Boy Disc Sports Internal Frame

Step 1

Put both end panels into the bag under the flaps on each side of the bag..

Step 2

Insert both tubes into divider/s...Tubes will push hard through the holes they are meant to be tight to keep the divider from slipping around to much...

note:(not all bags come with dividers) and (you may choose to not use any or all dividers that may come with your bag)

Step 3

Insert both tubes into one frame side...Then slide tubes down into bag...

Step 4

Grab a hold of one of the tubes with one hand and grab the connector with the other hand...Force the connector and tube away from each other until you are able to fit the tube inside the connector...Then repeat this step for the other tube...

Step 5

Once you have the tubes in place press firmly from the outside of the bag to ensure the tubes are in tight...

Now go play some disc!!!!